Step 1: Have your board and grip ready by your side
Step 2: Remove the plastic
Step 3: Get the grip ready
Make sure you balance it equally on the board
Step 4: Make sure you press down on the grip firmly
I personally enjoy using a cruiser wheel to flatten out air bubbles
Step 5: grab a metal object and rub it on the outline of your board
Step 6: Grab a razor and follow the white line
Nice and steady
Step 7: With your leftover cut out from the grip, use it to sand the cut
Step 8: Pierce your hardware holes
Step 9: Have your hardware and trucks on hand
Step 10: Place hardware
I use soft risers, but you can just throw the trucks on
Step 11: Add your trucks
Step 12: Tighten your hardware and go have fun!
